FABRICATION
   home  inquiry  test certificate  contact us  sitemap  faq's
 
 
 
Eva Bond Hi-tech Look
Flatness
Easy Availability
Size Advantage
Reduced Dead Weight
Water and Corrosion Resistance
Colour Uniformity
Sound Resistance
Thermal Resistance
100% Maintance Free
Impact Resistance
Versatility
Quick Installation
   
 
Click on view shadecard to
See your favourite color or
pattern.
   
 
 
Eva Bond currently has one lines for
manufacturing world class ACP’s using
the latest technology.
   
 
  ›  Processing Eva Bond ACP
 
Various fabrication techniques can be employed to fabricate Eva Bond Aluminium Composite Panels. It is recommended to carry out fabrication in a workshop to minimise defects, exercise overall quality control and to attain higher levels of accuracy.

The material can be fabricated by employing the right tools. The blade configuration and the cutting conditions should carefully selected to ensure that frictional forces are minimized and the heat produced during the process is also kept to the minimum.
 
 
Cutting
Cutting, electronic saw, band saw, disc scissor.
Slotting
After machining by electronic milling machine or portable milling machine, panel bendable to all kinds of polyhedron by hand
Chamfering
Fold into a carton after machining of punch machine and chamfer
 
 
Welding
By plastic rod and thermo -welding machine.
Angle
All angles available after slotting
Bending
Curve surface by 3-point style, 3-roller panel bender
 
 
Printing
All printing available by webby panel.
Riveting
By rivet, bolt, self-fasten screw etc.
Bolting
Curve surface by 3-point style, 3-roller panel bender
 
  ›  Installation Pre-Requisites 
Panels ought to be erected in accordance, with an approved set of shop drawings. In addition structural strength of anchorage and assorted hardware used for fastening should be as per standard and preferably in aluminium as per engineering recommendations.
Wherever aluminium comes in contact with dissimilar metals, it should be properly insulated else use of caulking tape is advised to avoid electrolytic corrosion.
   
The bend portions between panel joints shall not be caulked before protective film is removed. Ensure weep holes and drainage channels are unobstructed and free of debris, dirt and sealant.
   
It is recommended to install the panel vertically.
 
  ›  Cleaning Methods
Routine cleaning of the ACP surface is recommended. It may be washed with water and mild detergent, followed by clean water rinse. The frequency with which cleaning is to be carried out and the choice of a suitable cleaning agent depends largely on the location of the building and levels of contamination.
Do not clean when surface temperatures are above 40 degree centigrade to avoid formation of stain.
   
The cleaning operation must be carried out from top to bottom followed by proper rinsing with clean water to ensure the removal of the cleansing agent residues. A final wipe down by means of a sponge, leather or wiper is necessary to avoid water stains.
 
   
© copyright 2007, Eva Alu Panel Ltd. ALL RIGHTS RESERVED
Best viewed in 1024x768